SGS Approval Aluminum Silver Paste Non Flammable Flash Point 67 Degree

67 Degree Aluminum Silver Paste Non Flammable SGS Approve

HYY310

【INTRODUCTION】

When the floating aluminum paste is applied to the coating, the aluminum sheet will float on the surface of the coating, so as to form a dense, flat, bright aluminum film on the surface of the coating.So generally, when spraying or printing, the floating type of aluminum and silver paste will look brighter and smoother than the non-floating type of aluminum and silver paste, that is, it feels very fine.

【APPLICATION】

1. Metal powder coating

2. printing ink;

3. Lightreflecting coating

4. plastic color master batch

5. Roof coating

【NOTICE】

Because of its metal and chemical trait, the aluminum pastes should be kept airproofed in dry and draught indoor space(15℃-40℃),where the sunshine, rainwater can be avoided. To use as soon as possible when opened the package and sealed the barrel immediately when finished using so as to avoid the volatilization of solvent and additives. If deposited too long, a careful examination is necessary before using.
The aluminum pastes should be preserved far away from water, alkali, and acid to avoid any possible chemical change. If fire accident happened, use those chemical powder fire fighting equipments but water is forbidden. The solvent in aluminum pastes may separate from them especially when the temperature is high. It is normal and that will not affect the quality of products. To beat them up and fully mixed before use is enough.
 

【SGS REPORTS】

【Specification】