HYY300 High Whiteness Non Leafing Aluminum Paste GB12268-90

HYY300

【INTRODUCTION】

1) Non-leafing high metal flahsing aluminum paste

Made of high pure raw material, performing excellent metallic and sparkle effect.

Mainly used in plastic coatings, automotive, motorcycle, helmet and high quality industrial coatings.

2) Non-leafing electroplating-imated silver paste

Posesses very centralized distribution of particle size, which perform both excellent whiteness and brightness. Further more, it shows metallic effect like silk and chromed.

Suitable for high-end automotive coatings, refinish and plastic coatings, printing inks etc.

3) Fineness and whiteness aluminum pastes

Very fine particle size, narrow distributions, smoothness, and remarkable coverage powder. It’s not only good brightness, also perfect fine and white surface effect.

【PACKAGE】

We use metal drum for our aluminum pastes and the standard pack is 25kg per drum whose diameter is 30cm and the height is 40cm. In addition, we can supply palletizeing package for export when needed. The maximum volume of a pallet are 24 drams, 600KG.

【NOTICE】

Because of its metal and chemical trait, the aluminum pastes should be kept airproofed in dry and draught indoor space(15℃-40℃),where the sunshine, rainwater can be avoided. To use as soon as possible when opened the package and sealed the barrel immediately when finished using so as to avoid the volatilization of solvent and additives. If deposited too long, a careful examination is necessary before using.
The aluminum pastes should be preserved far away from water, alkali, and acid to avoid any possible chemical change. If fire accident happened, use those chemical powder fire fighting equipments but water is forbidden. The solvent in aluminum pastes may separate from them especially when the temperature is high. It is normal and that will not affect the quality of products. To beat them up and fully mixed before use is enough.
This material is listed in the flammable liquid (33646) according to the standard of GB12268-90, but the flash point (67℃) of the produce provided by the plant indicates that it seems not a flammable article. For safety sake it is suggested that the user should test the flash point prior to using the material. So Shanghai Center of Toxic Chemicals Information & Consultation (SCTCIC) determined that our aluminum pastes are not hazard products.

【SGS REPORTS】

【Specification】